Atlas Roofing recently introduced the Summit 60 Synthetic Underlayment to be used with shingles. The Susan G. Komen foundation will receive $2 for every roll of the underlayment that is sold over the next two weeks. Special pink-colored rolls with branding and ribbons will be available through Atlas Roofing distributors.
Summit 60 is a great option for roof systems that have a slope of 4:12 to 7.12 degrees. Double coverage can be achieved by applying an underlayment 24 inches thick and using fasteners through both layers. Because the underlayment is secured by a cover tarpaulin (which is an unsightly sag), it is important to overlap. Summit 60 will protect your deck and prevent water damage.
Summit 60 underlayment offers excellent moisture resistance. Its UV protection and water resistance will protect your roof from ice and water. It prevents water from penetrating the decking. This underlayment is made from polymeric scrim which is more resilient than typical felt. It is stronger and less slippy than traditional felt, and it can be used between the roof sheathing or underlayment. Summit 60 offers additional benefits, including enhanced walking during installation and sixty day UV protection.
Like any other underlayment you need to make sure it is installed correctly before you start. First, determine what type of roof deck it is. If it is ventilated, then you can proceed with installing Summit (r) 60. If your slope is either 4:12 or 7, you can install Summit (r 60) in a double-coverage manner. This means that overlaps between layers should not exceed 24 inches. Plastic cap fasteners should not exceed one-inch in diameter and one-inch in length to prevent leakage and rot.
Summit 60 has been designed to extend the life of roofs and to reduce water and ultraviolet penetration. It is highly resistant to water and UV protected. It helps reduce slippage between roof sheathings and underlayment. The underlayment is durable and will last for a long time. It is also very walkable. For increased strength and durability, the synthetic underlayment can be UV-coated.
Summit (r-60) should be applied to solid roof decks prior to applying the synthetic underlayment. It is a double-coverage method. In this case, it is crucial to make sure the sheets fit correctly. An ideal length for overlapping is 24 inches, not four. The layers can be adhered with adhesives. The installation of Summit (r) 60 must be done by a licensed roof contractor.
FAQ
What are my considerations when purchasing a new house?
Be sure to have enough money in reserve for closing costs before you purchase a new home. Refinancing your mortgage might be an option if you don’t have enough cash.
How important is it that you are preapproved for a loan?
Getting pre-approved for a mortgage is very important because it gives you an idea of how much money you need to borrow. It also helps you determine whether or not you qualify for a particular loan program.
What is the cost of renovating a house?
Renovations typically cost anywhere from $5,000 to $50,000. Most homeowners spend around $10,000 to $20,000 on renovations.
How Much Does it Cost to Renovate a House?
The cost of renovation depends upon the type of material used, the size of the project and the complexity of the job. Wood, for example, requires additional tools such as saws and drills. Steel, however is not so dependent. The price for renovations will also vary depending on whether you would like your contractor to do all of the work for you or if it is something you prefer.
Home improvement projects cost on average $1,000 to $10,000. If you plan to hire professionals, the total cost would range from $5,000 to $25,000. The cost to hire professionals would range from $5,000 to $25,000,000. On the other side, you could spend up to $100,000 if your task is completed entirely yourself.
You should know that there are many factors which determine the final cost of renovation. You should consider the material used, such as brick vs concrete. Brick vs. concrete, the project's size, the number and duration of workers, etc. When estimating the total cost for renovation, it is important to keep these factors in your mind.
Statistics
- They'll usually lend up to 90% of your home's "as-completed" value, but no more than $424,100 in most locales or $636,150 in high-cost areas. (kiplinger.com)
- The average fixed rate for a home-equity loan was recently 5.27%, and the average variable rate for a HELOC was 5.49%, according to Bankrate.com. (kiplinger.com)
- Design-builders may ask for a down payment of up to 25% or 33% of the job cost, says the NARI. (kiplinger.com)
- On jumbo loans of more than $636,150, you'll be able to borrow up to 80% of the home's completed value. (kiplinger.com)
- ‘The potential added value of a loft conversion, which could create an extra bedroom and ensuite, could be as much as 20 per cent and 15 per cent for a garage conversion.' (realhomes.com)
External Links
How To
Do you want to renovate your interior or exterior first.
Which should I choose first?
There are many factors to consider when deciding which project to start with. The most common factor is whether the building is old or new. The condition of the roof, windows and doors, flooring, wiring, and other aspects are all important. You should also consider the design, location, size, number and style of the building.
The roof should be the first thing you look at if the building's age is a concern. If the roof looks like it could fall apart any day now, then you might want to get started on the renovation before anything else. If the roof is fine, then you can move onto the next step. Next, check out the windows. If they are broken or dirty, then you might want them replaced before doing much else. After this, go through the doorways and make sure that they are clean and free from debris. You can now begin to install the flooring if everything looks fine. You want to make sure the flooring is sturdy and solid so it doesn't break no matter how much you walk on it. These steps will be completed before you can proceed to the walls. Look at the walls and see if they are cracked or damaged. If the wall appears to be in good shape, you can continue to the next steps. Finally, once the walls are inspected, you can work on the ceiling. You should inspect the ceiling to ensure that it can withstand any weight you put on it. If all is well, then you are ready to move on to the next phase of your renovation.
You would want to begin with the exterior if the building was recently built. First, examine the outside of the house. Is the house well-maintained? Is it free from cracks? Is it in good condition? If your exterior isn't looking great, you should make some changes. Your home shouldn't look shabby. Next, make sure to check the foundation. Repairing the foundation is a good idea if it appears weak. You should also inspect the driveway. You want it to be smooth and flat. If it isn't, then you should probably fix it. The sidewalk should be checked as well when you inspect the driveway. If it's not level, you might need to replace it.
After you have checked these areas, you can move on to the interior of your house. Start by looking at the kitchen. Is it well maintained and clean? If it is messy, then you should probably clean it up. Next, examine the appliances. They should be in good shape and working properly. If they're not, you can either replace them or repair them. Check the cabinets after this. If they are stained or scratched, then you should probably paint them. If they are in great condition, then you can go to the bathroom. The toilet should be inspected here. If it leaks, then you should probably get a new one. If the surface is just dirty, it should be washed. Next, check out all the fixtures. Make sure that they are clean. If they are filthy, clean them immediately. Lastly, check the countertops. If the countertops are cracked or chipped, you might want to repaint them. If they are smooth and shiny you can use a sealant.
The last step is to check the furniture. Verify that everything is in good condition. If something is missing or damaged, then you should likely find it. If it is damaged, you should probably fix it. Once everything is in order, you can then move on to the next step.